Shanghai Omega Machinery Co., Ltd.
  • Home
  • Single Screw Extrusion
    • Single Screw
    • Extrusion Barrel
    • Single Screw Extruder
  • Twin Screw Extrusion
    • Twin Screw
    • Twin Barrel
    • Twin Screw Extruder
  • Technical Support
    • Iron-base Ω101 Alloy and Its Characteristics
    • Technical Information of Ω301 Alloy
    • Information of Fe-base Ω101A Alloy
    • Information of Fe-base Ω102A Alloy
    • Information of Co-base Ω301A Alloy
    • Information of C/SiC Composite
    • At what time we have to use the liner technology
    • Material and Technology Information Of PM-HIP Oval liner
    • Material Choices for Oval liner and Screw Element
    • Information of Nanometer Ceramics Compound Coating for Single Screw and Screw Element & Kneading Disk
    • Micro Extruder and its Core Parts
  • About Us
  • Contact Us
  • Home
  • Single Screw Extrusion
  • Extrusion Barrel

Extrusion Barrel

Omega offers customization of extrusion barrels made using different materials. For a single screw extruder, we offer whole extrusion barrels and barrel liners. Not only do we recommend the best barrel materials to meet different manufacturing conditions, but we are also excellent at manufacturing bimetal barrels with a higher wear resistance and longer working life.

Highly durable bimetal barrel

The bimetal barrel has a basic body material with normal strength, but there are specific alloy layers on the surface of the bore in barrel. We can change the thickness and toughness of this layer, and make it wear resistant or corrosion resistant, or both wear resistant and corrosion resistant. The basic body material and corresponding alloy layer form a whole, called bimetal barrel.

    1. Extrusion Barrel
    1. Extrusion Barrel
    1. Extrusion Barrel
    1. Extrusion Barrel
Recommended Materials

Ω101
Ω201
Ω301

Materials of clad layers and their properties
Properties Ω101 Ω201 Ω301
Wear Resistance ★★★ ★★ ★★★
Corrosion Resistance ★ ★★★ ★★★
Main Elements Fe-Ni-B Ni-Co-Cr-B Fe-Cr-Ni-B-Carbide
Hardness (HRC) 58~64 50~56 55~65
Breaking Strain (%) 0.30 0.24 0.20
Elastic Strain (kgf/mm) 18600 215000 22000
Coefficient of Thermal Expansion(/℃) 15℃~250℃ 10.0×10-6 11.9×10-6 11.2×10-6
15℃~400℃ 10.5×10-6 12.6×10-6 11.9×10-6
Mark: ★★★: Excellent; ★★: Very good; ★: Good
Technique & Process Equipments for making Barrel

The chief leading member of our Shanghai Omega Group is the first creator in the bimetallic technology in the last century 80 's in China, researching and developing different kinds of alloy protective coatings for the bimetallic barrel and bimetallic screw. After years of constant exploration and improving, it’s proven that the bimetallic barrel and bimetallic screw protected by different kinds of wear-resistant and corrosion-resistant alloy feature excellent operation life and unmatched cost-performance. Our research and development is highly praised by the industry, and has made a significant contribution to the industry development.

    1. Extrusion Barrel
    1. Extrusion Barrel
    1. Extrusion Barrel

Our diesel injection furnace and centrifuge equipment for bimetallic cylinder molding are under a national patent protection, see below:
These equipment sets protected by national patents, coupled with the special process we have always adhered to, have guaranteed the proportion of hard phase inside the alloy layer and the hardness of the alloy layer of bimetallic cylinders produced by our company, are always stable and higher than other suppliers in China who mimic the bimetallic barrel technology created by our company.


Extrusion professional
We have several advantages over our competitors:
  • Strong designing strength
    We design and manufacture the screws, barrels, and extruders according to customer requirements.
  • Rich experience
    We have been in the extrusion industry for decades, and our products are used by prominent companies such as Foxconn.
  • Advanced material technologies
    Our PM-HIP processing technology increases the material density and reduces casting defects. The new design of an aluminum alloy clad layer on SiC ceramic allows the extruder to work, even in harsh conditions.
Whatever You Need

We are looking forward to your reply. If you need more information about us or customization information, please do not hesitate to contact us.

Send an Inquiry
Other Products
    1. Single Screw Extruder
    2. Single Screw Extruder
    1. Single Screw Extruder for Ceramic Membrane
    2. Single Screw Extruder for Ceramic Membrane
    1. Twin Screw
    2. Twin Screw
  • Single Screw Extrusion
    1. Single Screw
    2. Extrusion Barrel
    3. Single Screw Extruder
  • Twin Screw Extrusion
    1. Twin Screw
    2. Twin Barrel
    3. Twin Screw Extruder
  • Technical Support
    1. Iron-base Ω101 Alloy and Its Characteristics
    2. Technical Information of Ω301 Alloy
    3. Information of Fe-base Ω101A Alloy
    4. Information of Fe-base Ω102A Alloy
    5. Information of Co-base Ω301A Alloy
    6. Information of C/SiC Composite
    7. At what time we have to use the liner technology
    8. Material and Technology Information Of PM-HIP Oval liner
    9. Material Choices for Oval liner and Screw Element
    10. Information of Nanometer Ceramics Compound Coating for Single Screw and Screw Element & Kneading Disk
    11. Micro Extruder and its Core Parts
  • Contact Us
    1. Shanghai Omega Machinery Co., Ltd.

      Add.: No.168 Hualian Road, Putuo District, Shanghai City

      Contact: Williams Wu

      Tel.: +86-021-69921527

      Mobile: +86-18616920618

      Fax: +86-021-69921567

      E-mail: alphawu@126.com

      WeChat: wxsyyk1203wil

Home Single Screw Extrusion Twin Screw Extrusion Technical Support About Us Contact UsReview
Supported by ETW International Inc. USA