Shanghai Omega Machinery Co., Ltd.
  • Home
  • Single Screw Extrusion
    • Single Screw
    • Extrusion Barrel
    • Single Screw Extruder
  • Twin Screw Extrusion
    • Twin Screw
    • Twin Barrel
    • Twin Screw Extruder
  • Technical Support
    • Iron-base Ω101 Alloy and Its Characteristics
    • Technical Information of Ω301 Alloy
    • Information of Fe-base Ω101A Alloy
    • Information of Fe-base Ω102A Alloy
    • Information of Co-base Ω301A Alloy
    • Information of C/SiC Composite
    • At what time we have to use the liner technology
    • Material and Technology Information Of PM-HIP Oval liner
    • Material Choices for Oval liner and Screw Element
    • Information of Nanometer Ceramics Compound Coating for Single Screw and Screw Element & Kneading Disk
    • Micro Extruder and its Core Parts
  • About Us
  • Contact Us
  • Home
  • Twin Screw Extrusion
  • Twin Screw Extruder
  • Co-Rotating Twin Screw Extruder
  • Co-Rotating Twin Screw Extruder, S Series

Co-Rotating Twin Screw Extruder, S Series

The S series co-rotating twin screw extruder is excellent for pairing with a medium to low yield granulating machine. Highly accurate and abrasion resistant screws and barrels, and a high quality transmission case ensure the extruder runs smoothly.

Parameters
Model Screw Diameter (mm) L/D Ratio Screw Speed (rpm) Main Motor Power (kW) Load Torque (Nm/cm3) Max. Output (kg/hr)
SHJ-S-20 21.7 32~48 600 4 4~6 2~15
SHJ-S-25 25.0 28~64 600 4~7.5 4~6 5~60
SHJ-S-35 35.6 28~64 400/600 15~18.5 4~6 30~80
SHJ-S-50 50.5 28~64 400/600 45~75 4~6 150~250
SHJ-S-65 62.4 28~64 400/600 75~110 4~6 250~300
SHJ-S-75 71.0 28~64 400/600 90~160 4~6 300~600
SHJ-S-95 92.4 28~64 400/600 132~280 4~6 900~1200
SHJ-S-135 133.0 28~48 400/600 550~750 4~6 2500~3500
Extrusion professional
We have several advantages over our competitors:
  • Strong designing strength
    We design and manufacture the screws, barrels, and extruders according to customer requirements.
  • Rich experience
    We have been in the extrusion industry for decades, and our products are used by prominent companies such as Foxconn.
  • Advanced material technologies
    Our PM-HIP processing technology increases the material density and reduces casting defects. The new design of an aluminum alloy clad layer on SiC ceramic allows the extruder to work, even in harsh conditions.
Whatever You Need

We are looking forward to your reply. If you need more information about us or customization information, please do not hesitate to contact us.

Send an Inquiry
Other Products
    1. Co-Rotating Twin Screw Extruder, M Series
    2. Co-Rotating Twin Screw Extruder, M Series
    1. Co-Rotating Twin Screw Extruder, H Series
    2. Co-Rotating Twin Screw Extruder, H Series
    1. Co-Rotating Twin Screw Extruder, KP Series
    2. Co-Rotating Twin Screw Extruder, KP Series
  • Single Screw Extrusion
    1. Single Screw
    2. Extrusion Barrel
    3. Single Screw Extruder
  • Twin Screw Extrusion
    1. Twin Screw
    2. Twin Barrel
    3. Twin Screw Extruder
  • Technical Support
    1. Iron-base Ω101 Alloy and Its Characteristics
    2. Technical Information of Ω301 Alloy
    3. Information of Fe-base Ω101A Alloy
    4. Information of Fe-base Ω102A Alloy
    5. Information of Co-base Ω301A Alloy
    6. Information of C/SiC Composite
    7. At what time we have to use the liner technology
    8. Material and Technology Information Of PM-HIP Oval liner
    9. Material Choices for Oval liner and Screw Element
    10. Information of Nanometer Ceramics Compound Coating for Single Screw and Screw Element & Kneading Disk
    11. Micro Extruder and its Core Parts
  • Contact Us
    1. Shanghai Omega Machinery Co., Ltd.

      Add.: No.168 Hualian Road, Putuo District, Shanghai City

      Contact: Williams Wu

      Tel.: +86-021-69921527

      Mobile: +86-18616920618

      Fax: +86-021-69921567

      E-mail: alphawu@126.com

      WeChat: wxsyyk1203wil

Home Single Screw Extrusion Twin Screw Extrusion Technical Support About Us Contact UsReview
Supported by ETW International Inc. USA